1-22-2025 Notice of RCD1 Drainage System Record Correction Public Hearing
NOTICE IS HEREBY GIVEN that the Rice Creek Watershed District (RCWD) will hold a Public Hearing on Wednesday, January 22, 2025, at 6:00 p.m. The RCWD established the option for the public to participate in its meetings either in person or virtually. The in-person public hearing will be at the Mounds View City Council Chambers, 2401 County Hwy 10, Mounds View, MN 55112. Public participation using interactive technology will also be possible using Zoom. See the instructions below. The district engineer will discuss recommended changes to correct the official record of Ramsey County Ditch 1 public drainage system, and the board will consider written and verbal testimony from the public. An engineer’s report discussing the system’s historic alignment, dimension, and grade can be found online at the following website address: www.ricecreek.org or at the District office at 4325 Pheasant Ridge Dr. NE, Suite 611, Blaine, MN 55449. 763-398-3070. Questions and comments on the system can be directed by email to Tom Schmidt at tschmidt@ricecreek.org (preferred), phone at 763-398-3076, or to the address above.
Public participation using interactive technology will also be possible using Zoom. Zoom instructions are below.
Join Zoom Meeting:
https://us06web.zoom.us/j/81450066679?pwd=VUSEmYP1btVZbHMBLfg5utWsm8UFWt.1
Meeting ID: 814 5006 6679
Passcode: 084761
+1 312 626 6799 US (Chicago)
Meeting ID: 814 5006 6679
Passcode: 084761
Find your local number: https://us06web.zoom.us/u/kdgoJOv0aw
In addition, by a declaration under Minnesota Open Meeting Law Section 13D.021, all meetings of the RCWD Board of Managers are in person and public while recognizing that a Manager may, based on advice from a health care professional, have a legitimate reason for not attending a meeting in a public place in person, such as COVID-19 exposure or infection, and in such circumstances may participate in the meeting remotely.
Resources
Contact
If you have questions about this event, please contact: